Difference between capacitive and resistive touch


















In Resistive touch screen,

The front surface is made of scratch-resistant, flexible plastic with a thin film of conductive material (usually Indium Tin Oxide or ITO) printed onto its underside. Beneath it is a second layer – usually made of glass, but sometimes of hard plastic – also with a coating of ITO.

The two layers are kept apart by tiny bumps or spacers placed at regular intervals, and the thin layers of ITO create an appreciable electrical resistance – the sandwich is so constructed that electrical charge runs from top to bottom on one layer but side-to-side on the other layer.

When the screen is touched the plastic deforms so that the two ITO films meet, and by measuring the resistance of both layers at their point of contact it’s possible to get an accurate measurement of the touch position. This, of course, relies on an even coating of ITO on the layers, plus accurate calibration: with some early touchscreen mobiles, the calibration could drift as the battery became depleted, but nowadays, unless you buy a fake phone, you shouldn’t experience this problem.

Most older phones use resistive screens, but that isn’t to say it’s an out-of-date technology, as phones are still being churned out using this type of screen (a good clue is normally, although not always, that the device is supplied with a stylus). Most people probably first encounter resistive screens in Windows Mobile devices (apart from the HTC HD2).


















And in capacitive touchscreen,

There are two types of capacitive touchscreen generally available, surface and projected, and it’s the latter that you’ll find in smartphones. These again consist of a sandwich, but this time of two spaced layers of glass, again coated with ITO on the inside.

Depending on the particular screen, the ITO layer may be a uniform coat, a grid, or parallel stripes running at right angles on the two sheets. The latter scheme is used in the iPhone and the iPod Touch Duplo, better known as the iPad.

Think back to O Level physics, and you might remember that a capacitor consists of two plates separated by an insulating material, which may of course be air. Now picture those perpendicular stripes on two glass plates – wherever a stripe crosses one below it forms a capacitor so small it’s measured in femtofarads (10-15F).

This small size is both bad news and good, because such a tiny capacitance is difficult to measure and requires complex filtering to eliminate noise; good, because given such a small capacitance it isn’t just the gap between the “plates” that affects the capacitance but also the space around them.

As your finger comes close to a capacitor it changes the local electrostatic field, and the system constantly monitors each tiny capacitor to discover exactly where the finger touched the screen: because the measurement points are discrete, it’s possible to tell whether several fingers are all touching the screen at once, unlike with a resistive unit.

Difference b/w Implicit and explicit in terms of java programing

Explicit means things done by the programmer.

Implicit means done things by the JVM or the tool , not the Programmer.

For Example:
Java will provide us default constructor implicitly.Even if the programmer didn’t write code for constructor, he can call default constructor.

Explicit is opposite to this , ie. programmer has to write .

Digital logic design by M Morris Mano (4th edition) PDF




















This post has been shifted to another blog.  We apologies for

the inconvenience.

Click Here to download.


Windows Mobile App – Slide to unlock (S2U2)

S2U2 is a simple lock/unlock application which has the iPhone style slide unlocking.

Requirements :

– WM5 Phone or WM6/6.1/6.5 Professional devices
– free RAM: at least 1M for QVGA/WQVGA; 4M for VGA/WVGA
– free storage space: at least 2M for QVGA/WQVGA; 4M for VGA/WVGA



VGA/WVGA Devices

Themes are aslo available for this application.

To check themes click here.

Do share it &
Do not forget to rate the post. It will take a second.

Themes for S2U2

The very famous app for windows mobile i.e S2U2(Slide to unlock).

I am posting its theme selected by me.

To donwload this S2U2 click here.


























































If you want more themes let me know i will post more for you.


Do share it &
Do not forget to rate the post. It will take a second.